ZTE ZXHN H108N V2.5 Screenshot

Configuration procédure, step by step, by video in less than 4 minutes, of the wireless modem ZTE ZXHN H108N V2.5 as a Router and how to secure the WIFI...

Here is a more detailed breakdown of each step:

Step 1: Open a web browser and type in the address bar. This is the IP address of the modem router.

Step 2: Enter the username and password: admin/admin. These are the default credentials for the modem router.

Step 3: Click the Login button. This will log you into the modem router's configuration interface.

Step 4: Click the Quick Setup button for easy configuration. This will open a wizard that will guide you through the steps to configure the modem router as a router and secure your Wi-Fi.

Step 5: Select an existing VPI and VCI for your provider from the drop-down menu. If it doesn't exist, create one. The VPI and VCI are settings that are specific to your internet service provider (ISP). You can contact your ISP to find out the VPI and VCI values for your account.

Step 6: Give a name to your new VPI and VCI and set the new VPI and VCI values. If you created a new VPI and VCI, you will need to give it a name and set the new VPI and VCI values.

Step 7: Choose where to configure your modem as a router. Select Point-to-Point Protocol (PPPoe). This is the type of protocol that is used to connect to the internet.

Step 8: Enter the username and password for internet connection provided by your provider. You can contact your ISP to find out the username and password for your account.

Step 9: Select your country and give a name to your Wi-Fi SSID. The SSID is the name of your wireless network.

Step 10: Choose WPA and WPA2 PSK authentication type. This is the most secure type of authentication for Wi-Fi networks.

Step 11: Enter a strong password for your Wi-Fi. Your Wi-Fi password should be at least 8 characters long and should include a mix of upper and lowercase letters, numbers, and symbols.

Step 12: Choose TKIP+AES encryption algorithms. This is the most secure type of encryption for Wi-Fi networks.

Step 13: Change the password to access the modem program. Use your own password instead of the old password "admin". This is important for security reasons.

Step 14: Click the Finish button and log out to terminate your configuration. Once you have clicked the Finish button, your modem router will be configured and your Wi-Fi network will be secured. You can then log out of the modem router's configuration interface.

The ZXHN H108N is an ADSL subscriber access device. The ZXHN H108N provides the broadband Internet service and enterprise network access service through the high-speed ADSL or 3G wireless access mode. The ZXHN H108N provides four 10/100Base-T Ethernet user interfaces and the wireless access function that complies with the IEEE 802.11b/g/n standard.

The ZXHN H108N has the following features:

Four 10 Mbps/100 Mbps Ethernet interfaces.

Network configuration through friendly GUI and TR-069.

DHCP server functions.

Compatible with all the Internet standard applications.

Standard and compatible DSL interface.

Virtual server, IP address filter, and DMZ function.

System configuration in web mode.

Software upgrade.

Three upstream modes: ADSL, Ethernet, and 3G.

PPPoE, IPoE, and Static IP sessions, supporting up to eight sessions totally.

NAT protocol.

Wireless LAN IEEE 802.11b, 802.11g, and 802.11nprotocols.