Sagem Fast 2604: Configuration as bridge, as router and enable-secure the wifi
In this clear and concise under-4-minute tutorial, discover step-by-step how to configure your SAGEM Fast 2604 wireless modem in Bridge Mode or Router Mode, and properly secure your WiFi network. Perfect for both home and professional use, this straightforward guide walks you through all essential modem settings with ease.
SAGEM Fast 2604:
- ADSL:
RJ11 connector - This connector is identified by a grey line on the base (SAGEM F@stTM 2604/2644).
It is used for the connection to an ADSL line (WAN interface). - ETH1 to ETH4:
RJ45 connectors - (10/100BASE-T Ethernet Interface). These connectors are identified by a yellow line on the base.
They are used to connect to a computer or a television set (via a TV/VideoDecoder). - REG:
This button allows the router to be reset to the factory configuration.
Note: It is reset relative to the other elements to prevent an accidental loss of configuration. - On/Off switch.
- PWR:
Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from amains adapter unit.